How Root Karbonn A2 ,Installing Clockwork mod recovery for A2

How Root Karbonn A2 ,Installing  Clockwork mod recovery for A2


Warning:I am not responisible for any damage to your phone and rooting usually nullifies the warranty. so please procede with your own risk

I tried to root my karbonn A2 for 2 weeks and finally i got it. so im gonna share the steps involved in rooting and also provoide the tools for it.

NOTE: I do not take credit for any tool since all the tools were already available online, so credit goes to whoever programmed them. only thing i did was to alter the method slightly to get my phone rooted.

Lets begin. Before we start rooting our phone, most important thing is the drivers. so u need two types of drivers one is ADB (android debugging bridge) drivers and the other is preloader drivers. i have attached both of these drivers in the attachments u can download it.
Step1[only for beginners]: Go to setting>applications>development>enable USB debugging in the phone, then connect your phone to ur pc (remove all previous drivers if u have installed) then go to device manager>devices, right click on the usb device and click update driver and browse to folder containing the SPdrvers (u need to extract the folder from the attachment first).If driver is successfully installed then u should see "android phone" in ur device manager. to confirm it just run adb devices from the command line by chagning the directory to where adb.exe is, u should see the list of devices attached to ur pc. (usually adb.exe will be in android sdk tools folder or if u dont have one then check in ADB folder from superoneclick in the attachment).

Step2: ok, now that u have installed adb drivers, u need to install preloader driver (also known as downloading mode in some devices). to do this, disconnect ur phone from the pc, then switch off the phone, remove the battery and then connect ur phone to pc again (without the battery). then u should see windows trying to install drivers and fails. then go to device manager again and browse to folder containing USB VCOM drivers (see attachment). after it successfully installs procede to step 3.

Step3:: download, extract the files MTKROM and SPflash tool to ur pc. then put the battery inside ur phone then switch it on, connect it to pc (enable debugging all the time). then open command line then go to adb folder then type :adb devices- u should see the list of device attached (u will get some long numbers so dont worry). then type "adb shell" (without the quotes). u will get a $ sign, then type "cat proc/mtd > /sdcard/firmware.info" if its successful then a file named firmware.info will be created in ur sdcard root. then copy that file to ur pc.

Step 4: Now open that firmware.info in MTKROM.exe u should see a list tables and address like in the image below. then click save scatter and rename the filename to MT6575 instead of MT6573 (and leave everthing else as it is). so a file named "MT6575_Android_scatter.txt" will be created.


Step 5: Now open Spflash tool and load the scatter file in that. u should see something like this in the image below.


STEPS TO BACKUP ORIGINAL BOOT AND RECOVERY

Step 6: Before we actually begin to root its important to make a backup of current images. so to do that, go to READ BACK tab in sp flash tool. click on Add>double click on the page file and save as "Boot.img" somewhere safe. then click on "Read Page only", this is very important. then look at the address side by side from MTKROM and enter into sptool. the start address is the address in which the boot.img begins and length is the length of boot.img. so final address will be startaddress+length =start address of next image (recovery.img). In MTKROM the start address is given as "PART ADDRESS". after entering those carefully click ok. if u want to be sure then use programmer calculator and add the address.
Note :the address will be in hexadecimal format not decimal.


Step7: In order to read the firmware from the phone, disconnect the phone from your pc, remove the battery, dont connect it yet. now click on "Read back" button in the sptool (its after Add,remove button). now the software starts searching for the device. now connect the device to the pc (without battery ofcourse). now if have installed USB VCOM drivers correctly then the sp tool should detect ur device and start reading from it. u will see Red colour in the
task bar when it detects then blue colour while the tool is reading the phone. wait untill the reading is complete. A green circle will pop up after it successfully reads from the device. (refer the images below)







Step 8: repeat step seven as described above for recovery.img (save the file as recovery.img) then select "read page only" option, enter start address as 0x0980000 and length as 0x0500000. (please enter the address carefully cross check with MTKROM image addresses.)

Note: You have to disconnect the device first then click read back button after entering the addresses then connect the device, otherwise the sptool wont detect your device!.

Actual Rooting Procedure

Step 9: Now that you have backed up both boot and recovery images its time to start the actual rooting. download the boot.img file from the attachment and save to your pc (dont replace it with your backup image that you saved earlier). go to download tab in the sp tool and tick only boot.img and uncheck all others (if any of them has been checked already) and click on Bootimg and browse for the folder where u downloaded boot.img from the attachment and NOT THE BACKUP! after that disconnect your device, then click download button above( after format->upgrade button) or f9 from keyboard. the tool will start searching the usb com ports. now connect your device and wait till it downloads fully. Note: In downloading your will get RED colour first, then YELLOW colour while flashing, and finally a GREEN circle after flashing is complete).



Step 10: The most important and complicates steps are over. now all you have to do is put your battery to your phone and switch it on. now after it sucessfully boots up, open superonclick.exe (you will get this software online and its very popular tool for rooting) and connect the device to your pc (enable debugging of course), then click Root button in superoneclick and Voila! your phone is rooted. enjoy and dont forget to press thanks button if ive helped

Note: u will need .NET framework 3.5 to run superoneclick.

Method To Unroot

For unrooting your mobile all you have to do is flash the original, backup boot image back to your phone. just open sptool and load the scatter file, then click on bootimg then browse to wherever u have stored backup boot.img then click download button then connect your device without the battery and thats it. you will get back original firmware without the root!.


Clockwork mod recovery for A2

There is no official cwm recovery for A2, but i ported cwm for other MT65xx devices to A2. so here are the steps to flash.
step 1: download recovery.img from the attachment.
step 2: open sp flash tool and load scatter.txt (for detailed description refer rooting steps). then tick recoveryimg and browse and set the path of the recovery.img you just downloaded from attachment.
step3: click on download button at the top or press f9. then take out the battery from the phone and connect it to the pc. the tool will detect your phone and start flashing cwm recovery.wait untill the green circle pops up.
step 4: now put in the battery and press power button+volume up and hold it for few seconds and voila!! cwm recovery boots up. And to revert back to original recovery just flash the recovery.img that you backed up during rooting process using the above steps.

Note: Do Not factory reset your phone without backing up the IMEI number. After rooting your device please backup your phones IMEI number which is stored in data/nvram/md/NVRAM/NVD_IMEI/MP0B_001 to a safe place. or there is an application called mobileuncletools (a chinese app) which helps to backup your IMEI to sdcard and restore it back. if u loose your IMEI and reset your phone then you cannot call or recieve sms etc

No service and invalid IMEI solution

explanation:
In case u did factory reset of the phone, then all your data will be wiped including the imei number. it will be reverted to factory imei number, hence you cannot connect to any mobile networks in india or anywhere else because most network operators wont allow to use the network with dupicate or invalid imei numbers. every device has a specific imei number. in this device your original imei numbers (15 digits) will be on the back of your battery.
Restoring is tough very simple procedure, creating the required files is a major headache. At first i thought it was impossible to restore the imei back (trust me i tried all the available solutions that u get in the internet, infact there are 5 different types of solutions, none of which worked for this device). luckily one day i found a chinese software which actually did create a imei file that is compatible with this device (phew !, yeah i know) and so i did successully restored my imei back and i can once again connect to mobile network and make calls.. so here it goes.


How to restore IMEI number? (MUST BE A ROOTED PHONE)

1) if u have made the backup of MP0B_001 file in /data/nvram/md/NVRAM/NVD_IMEI/MP0B_001 , then install root explorer and simply replace your current file with the backed up MP0B_001 and set the permissions to rw-rw---- and restart.
2) if u havent backed it up (too bad), then download the chinese software sn_gen.zip from the attachments and enter both imei numbers that is found in the back of your battery (enter the numbers correctly and cross check it again, its 15 digit number). then the software generates a new MP0B_001 file, copy and paste in the above mentioned directory and set the permissions to rw-rw---- and restart.
dont forget to press thanks button if ive helped you


Uploaded the ics version of the stock firmware for the Karbonn A2/A2plus
http://www.moulnisky.com/index.php?dir=Karbonn/A2plus/ 

Download Links:
Drivers: http://www.4shared.com/rar/XLiLMsG3/...vers_v14.html?
SP flsah tool: http://www.4shared.com/archive/bjTXv...v3122401.html?
scatter txt: http://www.4shared.com/office/W7Fk6V..._scatter.html?

Attached Files
File Type: zip MTKROM.zip - [Click for QR Code] (611.0 KB)
File Type: 7z MT6575 USB VCOM drivers.7z - [Click for QR Code] (2.1 KB)
File Type: img boot.img - [Click for QR Code] (3.40 MB)
File Type: img cwmrecovery.img - [Click for QR Code] (4.59 MB)
File Type: zip sn_gen.zip - [Click for QR Code] (59.5 KB

Comments

Popular posts from this blog

How To Root Any Karbonn Android Mobile Simple Guide

How to Use WhatsApp for PC & Android

How To Root Unroot CWM And How to Flash Galaxy Ace S5830